EN1000-RQD THERMAL CONDUCTIVITY GAS ANALYZER

OVERVIEW

    EN-600 serial thermal conductivity gas analyzer utilises the gas thermal conductivity, a physical property which measures specific component in mixed gases through that gases have different thermal conductivities. The analyzer has such function as isolated current output, relay alarm output, communication interface and measured data memory.

FEFATURES

  • High performance, non-depleting, thermal conductivity gas transducer
  • With excellent reliability, high-sensitivity, low drift
  • No requirement for a reference gas during operation
  • Big LCD display, English or Chinese menu to operate
  • Automatic memory measured data and curve, with checking privious measured data
  • One isolated, linearized 0~10 or 4~20mADC output
  • One alarm relay, with upper or lower limit alarm point can be set within the full range
  • With RS232 interface for measured data communication

    SPECIFICATIONS

    Measuring priciple：Thermal-conductivity
    Measured component：H2、Ar、CO2 and any other two components mixed gas
    Maximum range：0~100%（Arbitrary range option between 0~100%）
    Minimum range：0~1%
    Linearity error：≤±1.5%FS
    Resolution：0.01%Outline dimension：19″3U，483×133×360mm

    REQUIREMENTS FOR MEASURED GAS

    Temoerature：5~40℃
    Pressure：0.002~0.05MPa
    Dust ：0.3μm or less (Recommended membrane filter)
    Moisture: Below a level where saturation occurs at 2°C (condensation unallowable)
    • Download